Quarter-Life-Crisis Posted June 16, 2010 Share Posted June 16, 2010 After slamming the hatch on the gt/e several times i tried the actual latch. If i put a screwdriver in it to latch it i could simply pull down on it and it would unlatch!! Hence a hatch boot latch assembly is required. I've also found the hot/cold lever on the dash is very sloppy and will not move the sliding mechanism visable when the bonnet is open. Hence a heather cable is also required. It may be that its simply become unhooked but id sooner look for another now rather than later. Link to comment Share on other sites More sharing options...
Cavtastic Posted June 16, 2010 Share Posted June 16, 2010 I'll sort these issues on my next trip down David. The Grand Voyager has decided to eat the ignition key and jam the ignition switch up. Result new barrel and keys from Mopar only £128 + RAT and I have to wait until Monday Link to comment Share on other sites More sharing options...
Recommended Posts