399Road Posted October 26, 2011 Posted October 26, 2011 (edited) Hello, I'm going to run an MBE ignition only ECU on my 16V XE'd car, to get rid of the Distributor. There's four wires that plug into the ECU's loom and I don't know which connect up to what. Has anyone else got wiring instructions for one of these MBE set ups. Obviously there's an ignition feed and earth and I'm guessing one of the other wires will run my Rev counter. Can anyone help? .Luke. Edited October 26, 2011 by 399Road Quote
simon p Posted October 26, 2011 Posted October 26, 2011 Hello, I'm going to run an MBE ignition only ECU on my 16V XE'd car, to get rid of the Distributor. There's four wires that plug into the ECU's loom and I don't know which connect up to what. Has anyone else got wiring instructions for one of these MBE set ups. Obviously there's an ignition feed and earth and I'm guessing one of the other wires will run my Rev counter. Can anyone help? .Luke. What colours do you have? Quote
upk Posted October 27, 2011 Posted October 27, 2011 (edited) Fuel pump relay? pays to read the question, the clue was in there Edited October 27, 2011 by upk Quote
399Road Posted October 27, 2011 Author Posted October 27, 2011 What colours do you have? Thanks for your reply, I'll have a look at which colours the wires are this weekend..... Luke Quote
bones Posted October 28, 2011 Posted October 28, 2011 (edited) This might help http://www.sbdev.co....nstructions.pdf If not have a look on the SBD website. They have instruction sheets, if not you could give them a call as they are really helpful and good to deal with. Hope this helps... Edited October 28, 2011 by bones Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.