opelmantagsi Posted May 27, 2012 Share Posted May 27, 2012 guys I am in a bit of sch-took on this one, after media blasting we have uncovered some nasty bits. rear quarter has had a shunt at some stage, dodgy panel beater repairs and lots of bog water into the area of the passenger side seat belt mounting has caused surface rust, blown away now to reveal holes so I need some help cut panel or ideally a complete rear quarter for the drivers side as much of the inner sill as possible realize this is going to be quite expensive to ship to Auckland NZ so may look at buying additional parts if available. would look at rear panel, sills, the other rear quarter. I also need a new 3 piece boot spoiler at some stage hope someone can help me out as this is kind of holding up progress now Link to comment Share on other sites More sharing options...
2908642343 Posted May 27, 2012 Share Posted May 27, 2012 Hatch drivers side rear qtr new ? Dr Manta did have them in stock for circa €499 ish plus shipping. Or if i get a chance I will look in my stock and see how many I have. The inner section is NLS so easier to make one up or someone might be able to send a cut out from a scrapper. John Link to comment Share on other sites More sharing options...
Kevin Abbott Posted May 27, 2012 Share Posted May 27, 2012 Hi Derek. The red lines show in this. I have the rear quarters and can plasma cut them from my stock. Shipping to NZ is okydoky too I do not have the inner sill bit though. Cheers Kev I have an as new spoiler tio Link to comment Share on other sites More sharing options...
opelmantagsi Posted May 27, 2012 Author Share Posted May 27, 2012 Thanks Kev, sounds like a plan to me, like I say this is now holding up progress. the rear wheel arch is also rumpled stilskin, might need to see if anyone has welded in flared guards off another car, I see you did something with astra GTE guards, cant get astra GTE here but most other euros are in the scrap yards here Link to comment Share on other sites More sharing options...
Kevin Abbott Posted May 27, 2012 Share Posted May 27, 2012 I remember someone using rover sdi arches , think it was nelson Stewart on his a series. That looked awesome. Post quote is going to be fun on those panels!! Do you need the wheel arch? Link to comment Share on other sites More sharing options...
mikemanta Posted May 27, 2012 Share Posted May 27, 2012 going to be scapping a hatch shell soon I will have a look tomorrow at the inner sill for you . Link to comment Share on other sites More sharing options...
opelmantagsi Posted May 27, 2012 Author Share Posted May 27, 2012 awesome guys, I do appreciate this. I have also sent Callum from retro power and e-mail, he has outer sills and wheel arch repair panels for sale on ebay If for any reason there is an issue getting Callum to respond maybe someone could buy on my behalf and forward with the other items? so the shopping list now stands at rear quarter cut inner sill cut 2 x outer sills 2 x wheel are repair panels Link to comment Share on other sites More sharing options...
Kevin Abbott Posted May 27, 2012 Share Posted May 27, 2012 They can send them to me and I'll sort it out Link to comment Share on other sites More sharing options...
lepo5 Posted May 27, 2012 Share Posted May 27, 2012 Derek, I have a 1 piece Irmscher spoiler if thats any good to you and i could send it to kev to send over with the other stuff, but would not be able to get it to kev for a couple of weeks? Link to comment Share on other sites More sharing options...
mikemanta Posted May 28, 2012 Share Posted May 28, 2012 had a look its got a bit of surface rust around the top screw holes but will clean up ok the seat belt mount is fine. Is it just the seat belt mount you are repairing? Link to comment Share on other sites More sharing options...
opelmantagsi Posted May 28, 2012 Author Share Posted May 28, 2012 yes I need to cut out a section of the inner sill so the welds are not close to the seat belt mounting point. my email is derek@estimation.co.nz if you have any pics Link to comment Share on other sites More sharing options...
mikemanta Posted May 28, 2012 Share Posted May 28, 2012 e mail sent with pics Link to comment Share on other sites More sharing options...
opelmantagsi Posted May 28, 2012 Author Share Posted May 28, 2012 received e-mail re inner sill, just need to hear from Kevin on the rear quarter panel Link to comment Share on other sites More sharing options...
Recommended Posts