GMC 8 Posted June 1, 2012 Share Posted June 1, 2012 (edited) In my rebuilt C20XE manta I fitted remanufactured (biege colour) injectors, but when fully heated up the car starts to mis-fire. (only when under load) Everything else has been checked and is ok, so all points to the injectors? Anyone got any good or bad comments about re-maufactured injectors? Thanks Edited June 1, 2012 by GMC Quote Link to post Share on other sites
rutts 459 Posted June 2, 2012 Share Posted June 2, 2012 put bosch blue ones in and a 3 bar regulator from a dis pac 16v engine. Quote Link to post Share on other sites
tony g 79 Posted June 3, 2012 Share Posted June 3, 2012 Id be looking at coil pack/ignitor if it were me. Cant see injectors going bad when warm. Tony Quote Link to post Share on other sites
opel2000 87 Posted June 14, 2012 Share Posted June 14, 2012 Id be looking at coil pack/ignitor if it were me. Cant see injectors going bad when warm. Tony Rutts mate, I thought the blue ones had less flow over the beige? I don't know for sure. Quote Link to post Share on other sites
garymanc 643 Posted June 14, 2012 Share Posted June 14, 2012 Rutts mate, I thought the blue ones had less flow over the beige? I don't know for sure. the blues have a different spray pattern i found it best to use 2.5 reg as it was over fueling, got a chipped ecu to test with the 3.0 reg and see how that goes Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.