taylorblue5 Posted December 16, 2012 Share Posted December 16, 2012 Lookin to source a set of uprated engine mounts from my xe'd manta as mine are a wee bit soft. Any suggestions guys? Link to comment Share on other sites More sharing options...
Kevin Abbott Posted December 16, 2012 Share Posted December 16, 2012 Pearl parts em672. Link to comment Share on other sites More sharing options...
manta3000 Posted December 17, 2012 Share Posted December 17, 2012 Pearl parts em672. not sure what this means kev? suppliers? colin Link to comment Share on other sites More sharing options...
yellowhusaberg Posted December 17, 2012 Share Posted December 17, 2012 got some heavy duty mk1/2 escort one's in my 16v manta,bolted straight in and a lot firmer,think they may have come from a firm called rally design Link to comment Share on other sites More sharing options...
taylorblue5 Posted December 17, 2012 Author Share Posted December 17, 2012 Thanks guys il have a look. Kev can you post a link?? Cheers. Link to comment Share on other sites More sharing options...
mantasrme Posted December 17, 2012 Share Posted December 17, 2012 I use one of these on the exhaust side and a standard rubber on the drivers side, as its only the passanger one that gets pulled apart. http://www.rallydesign.co.uk/product_info.php?cPath=609_881_884&products_id=7219 Link to comment Share on other sites More sharing options...
Kevin Abbott Posted December 18, 2012 Share Posted December 18, 2012 The rubber mount is made by pearl parts and the order number is em672. Or pb316 cotton reel engine mounts. They are available from most motor factors at a cost of about £7 each. Don't get QH ones if you're offered them as an alternative as they are really soft. The pearl parts ones are hard as f@@k ;-) Link to comment Share on other sites More sharing options...
Recommended Posts