Jump to content
Retro Power

Manta/ascona B Poly Bushes & Kits With Club Discount

Recommended Posts

Full Polyurethane suspension bush to suit Opel Manta B, Ascona B and MK1 Vauxhall Cavalier.

We always use SuperPro bushes on our project vehicles as we've found them to be a superior fit to other manufacturers. A good example on this kit is the new metal shells which are supplied for the lower wishbones. Many kits don't include these and the bushes are sized to simply fit directly into the wishbone. This invariably leads to the bush spinning in the wishbone (rather than rotating on the inner tube as it should) causing rapid wear of the bush.

We can advise on fitting these bushes (or probably more relevant, removing the old bushes, as they can be temperamental little blighters!)

The only points of note on this kit are that on the chassis end of the Panhard rod you will need to retain the original inner tube, and for the anti-roll bar drop links you will need to retain all the original metal parts. If yours are corroded then OE links are still available from your motor factors: QH part number QLS1750S or Delphi part number TD272W.

All kits and bushes are in stock for next day delivery (included for FREE!)

Price is £290 Inc. VAT and Delivery (Next Day) which represents over 10% off RRP.

PAYPAL to paypal@retropower.co.uk

This is the contents of the kit which you will recieve (they will be in sealed packaging though!)

DSCF0260_zpsb13090cf.jpg

DSCF0261_zpscb40fe50.jpg

DSCF0262_zpsc18321f2.jpg

DSCF0263_zps946c1215.jpg

DSCF0268_zpse3b2a96e.jpg

DSCF0269_zps78f2a0be.jpg

DSCF0270_zps7c985f95.jpg

DSCF0272_zps251cc1f9.jpg

DSCF0275_zpsd1702647.jpg

  • Like 1

Share this post


Link to post
Share on other sites

We can also supply any of the above 'sub-kits' individually.

We can supply the rear anti-roll bar to chassis (drop link) bushes (8 rubbers and 4 tubes) for an additional £50.

Finally we are currently sourcing Manta A lower arm bushes (all the others are the same as B) which we'll keep you posted on ;-)

Share this post


Link to post
Share on other sites

Hi mate, after a price on a bush kit minus rear arb bushes and panhard rod front bushes. Also are you still selling panels as I am after rear arches and sills for a hatch. Br

Josh

Share this post


Link to post
Share on other sites

Hi

Are the Panhard bushes suitable for the Manta A? And if so should they have sleeves? One side of mine has a sleeve and the other doesn't...not sure if I've lost it or if it wasn't there to begin with.

Thanks

Share this post


Link to post
Share on other sites

think we mentioned in the ad, if you mean the tube that goes through the bush, then yes on the b series the chassis end has a tube and the axle end does not as it pivots directly on the pin. You need to keep the original tube for the chassis end

Share this post


Link to post
Share on other sites

Thanks for ordering Matt.

As an update to the original post we have now worked with Superpro to bring out a new Panhard rod kit that includes the chassis tube (standard in our full kits now) and I can also supply the rear ARB drop link bushes as long as you have the ARB type that has a loop each end. This kit is £50 inc.VAT which is a lot, but then there are 8 top hat bushes and 4 tubes in the kit, so a lot of parts!

Share this post


Link to post
Share on other sites

Hi there, just interested in a "rear end" kit if that's possible? Trailing Arms and Panrod I think. Don't know if id need anything else

Share this post


Link to post
Share on other sites

Hi Im new to the forum and I was looking for two sets of these bushing kits. Are these still available?

Ps.Sorry for digging up an old thread

 

Thanks in advance!

Share this post


Link to post
Share on other sites

Hi Im new to the forum and I was looking for two sets of these bushing kits. Are these still available?

Ps.Sorry for digging up an old thread

 

Thanks in advance!

 

 

 

Full Polyurethane suspension bush to suit Opel Manta B, Ascona B and MK1 Vauxhall Cavalier.

We always use SuperPro bushes on our project vehicles as we've found them to be a superior fit to other manufacturers. A good example on this kit is the new metal shells which are supplied for the lower wishbones. Many kits don't include these and the bushes are sized to simply fit directly into the wishbone. This invariably leads to the bush spinning in the wishbone (rather than rotating on the inner tube as it should) causing rapid wear of the bush.

 

We can advise on fitting these bushes (or probably more relevant, removing the old bushes, as they can be temperamental little blighters!)

 

The only points of note on this kit are that on the chassis end of the Panhard rod you will need to retain the original inner tube, and for the anti-roll bar drop links you will need to retain all the original metal parts. If yours are corroded then OE links are still available from your motor factors: QH part number QLS1750S or Delphi part number TD272W.

 

All kits and bushes are in stock for next day delivery (included for FREE!)

 

Price is £290 Inc. VAT and Delivery (Next Day) which represents over 10% off RRP.

 

PAYPAL to paypal@retropower.co.uk

 

This is the contents of the kit which you will recieve (they will be in sealed packaging though!)

 

DSCF0260_zpsb13090cf.jpg

DSCF0261_zpscb40fe50.jpg

DSCF0262_zpsc18321f2.jpg

DSCF0263_zps946c1215.jpg

DSCF0268_zpse3b2a96e.jpg

DSCF0269_zps78f2a0be.jpg

DSCF0270_zps7c985f95.jpg

DSCF0272_zps251cc1f9.jpg

DSCF0275_zpsd1702647.jpg

 

 

I also need to buy two sets of bushes. It would be good to know what you currently have on offer?

 

Thanks

Share this post


Link to post
Share on other sites

Retro power just want to no if this advert is still running if so would like to order a full set please

Share this post


Link to post
Share on other sites

Yes, but Nat and Callum aren't on here much at the moment. Visit their website or give them a ring!

Share this post


Link to post
Share on other sites

To whom it may concern 

I'm after a full bush kit for the front and rear axels and the centre prop bust and I need every single bush, Can you email me a price for the lot please.  

mantae703dho@gmail.com

Thank you 

Adrian

Share this post


Link to post
Share on other sites
On 18/03/2019 at 15:10, Ajwatts80@googlemail.com said:

To whom it may concern 

I'm after a full bush kit for the front and rear axels and the centre prop bust and I need every single bush, Can you email me a price for the lot please.  

mantae703dho@gmail.com

Thank you 

Adrian 

Contact Retropower direct

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...