Manta B 2.0Gte & 20Xe On Twin 45's

[mickeyb]

as in the title, wot else will be needed to put the engine in?

mounts etc

i'm taking the engine out of a indy kitcar tomo and was hoping to have it in running by the weekend!

any advise would be great

[garymanc]

a guide here http://www.opelmanta16v.4mg.com/

[mickeyb]

thanks a great help

[mantajock]

manta 1800 sump ,mounts,hoses,gearbox all from the 1.8 ohc manta , and what ever you use for ignition ie mbe dta or old dissy set up .

jock

[MANTAMAN]

The other problem you have is the rear carb will foul the servo if it has a trumpet on it, once did a cut back/recessed servo for a friend as a way round it.

[Retro Power]

if you struggle for a sump we supply them new, as well as most of the other conversion bits

[mickeyb]

thanks guys, removed the old 2l tonight, thankfully the xe already had a 1.8 sump on it, but i need engine mounts and pipes..

i'll give you a ring tomo retropower, need these parts asap as i'm doing an event nxt sunday in the car!!

[Retro Power]

I'm not in today but the rest of the guys are, we definitely have pipes and mounts in stock

[Retro Power]

pipes and mounts being collected tomorrow am

[mickeyb]

thanks retro power,

received mounts and pipes yesterday, all fitted, geat job..

power steering column made and fitted, servo moved to the front behind drivers headlamp, new exhaust made, hydraulic handbrake fitted, electric fan fitted and complete car rewired...

test drive today ready for some action tomorrow on the track