®evo03 Posted February 16, 2014 Share Posted February 16, 2014 as above, 5 speed Manta gear box. Have front & rear seal, cant find gear selector seal, Suprisingly a stready stream of oil from here is affecting exhaust manifold below! Seal is removed, will reply with GM number later. Any advice welcome! Link to comment Share on other sites More sharing options...
611 Posted February 16, 2014 Share Posted February 16, 2014 Hi Brady I got my front and back seals from here. http://www.bearingkits.co.uk/MANTA-5-SPEED-GEARBOX-SEALS/272.htm but they didnt have the shaft seal, but if your stuck this site has some good stuff. http://www.edelschmiede.com/shop/getrag-240-getriebe hope this helps. Andy Link to comment Share on other sites More sharing options...
paulmanta Posted February 16, 2014 Share Posted February 16, 2014 Don't bother with GM, go to a BMW dealer and ask for a seal from a 1990 1600 or 1800cc bmw 3 series, they use the same Getrag gearbox. I got lots of parts for a Getrag rebuild this way, the reverse light switch is the same as well if yours is giving trouble like all mine seemed to ! 1 Link to comment Share on other sites More sharing options...
stuart h Posted February 17, 2014 Share Posted February 17, 2014 There should be sizes on the old seal. ID OD and depth something like eg (15 30 7) try a search on eBay with the numbers off your old seal Link to comment Share on other sites More sharing options...
Recommended Posts