guysat Posted August 31, 2015 Share Posted August 31, 2015 Hi, looking for a adjustable Panhard rod. Does anybody sell these (or have one available) or is this something that is usually modified by ourselves Guy Link to comment Share on other sites More sharing options...
GTREA Posted August 31, 2015 Share Posted August 31, 2015 I THINK this one fits http://www.ebay.com/itm/Holden-Commodore-Adjustable-Panhard-Rod-VB-VC-VH-VK-VL-VN-VP-VR-VS-SS-Brock-SLE-/271005108558?hash=item3f1929c94e&vxp=mtr Derek from NZ fittted one to his 1 Link to comment Share on other sites More sharing options...
guysat Posted August 31, 2015 Author Share Posted August 31, 2015 (edited) That looks a nice sturdy one, shame the postage is more than the product. Have removed my panhard rod and measured approx. 880mm so the one above at minimum 890 would not work. Was hoping more local to the UK Edited August 31, 2015 by guysat Link to comment Share on other sites More sharing options...
guysat Posted September 2, 2015 Author Share Posted September 2, 2015 Had no luck finding one, so decided to modify the existing bar Cut end off, turn the end of an M16 Cap-Head down to create a press fit in tube, just need to weld it up now 4 Link to comment Share on other sites More sharing options...
Kevin Abbott Posted September 3, 2015 Share Posted September 3, 2015 Nice job What size is the rod end? I sold both my adjustable pan hard rods and now sodding need one! Link to comment Share on other sites More sharing options...
guysat Posted September 3, 2015 Author Share Posted September 3, 2015 Nice job What size is the rod end? I sold both my adjustable pan hard rods and now sodding need one! I used M16 rod-end but will bush the bore (Skiffy flanged bushes) to re-use the M12 bolt connecting to the chassis. Didn't fancy using M12Now welded and just waiting for the paint to dry before fitting 2 Link to comment Share on other sites More sharing options...
Recommended Posts