Jump to content
DeeBob

GTE clutch

Recommended Posts

Hello all,

In need of a decent clutch for my 1987 GTE, getting into the nitty gritty with it now and can't seem to find the right clutch online or in person for the life of me.

 

Any help would be greatly appreciated,

 

Cheers

Share this post


Link to post
Share on other sites
Posted (edited)

I keep a watch list going for Manta bits on eBay & saw this, no idea if its any good for you though

https://www.ebay.co.uk/itm/Opel-Ascona-Manta-2000-CIH-engine-paddle-clutch/153858479231?hash=item23d2ae147f:g:pm4AAOSwpB5eZihC

Try this link too YMMV

https://www.autodoc.co.uk/car-parts/oem/90189816

Edited by Trooker
additional info

Share this post


Link to post
Share on other sites

Available new from euro car parts approximately £100

If your local branch denies all knowledge as can happen give me a shout and ill help out 🙂

Share this post


Link to post
Share on other sites

Been looking on the euro car parts site and have had no luck.Local store in newport is impossible to get into at the moment and they dont answer the phone.Are they definitely available at europarts or is ebay the best route.Thankyou.

Share this post


Link to post
Share on other sites
On 10/08/2020 at 18:46, shaunwilli said:

Been looking on the euro car parts site and have had no luck.Local store in newport is impossible to get into at the moment and they dont answer the phone.Are they definitely available at europarts or is ebay the best route.Thankyou.

Yes since i posted that euro have stopped supplying them

I needed one myself recently and found gte clutches to be totally unavailable at any price

Im now having them remanufactured myself and can supply them at £120 on an exchange basis, i must have your old plate and cover back in order to continue supply

Release bearings are brand new

Uk mainland post and packing is £10

  • Like 2

Share this post


Link to post
Share on other sites

Yes sounds good.The problem i have is that the clutch fitted in my car appears to foul on the flywheel bolts.There are visible signs on the four springs in the clutch plate and the flywheel bolts.I assumed the noise when depressing the clutch was the release bearing.Everything seems in good nick apart from the rubbing together.So i wanted a new clutch incase the wrong one was fitted.

Share this post


Link to post
Share on other sites
54 minutes ago, MrCarlos said:

Yes since i posted that euro have stopped supplying them

I needed one myself recently and found gte clutches to be totally unavailable at any price

Im now having them remanufactured myself and can supply them at £120 on an exchange basis, i must have your old plate and cover back in order to continue supply

Release bearings are brand new

Uk mainland post and packing is £10

GTE clutch 8.5in? Same as all 2.0 clutches? If so I might take you up on one of them.

Share this post


Link to post
Share on other sites
11 minutes ago, Sutty2006 said:

GTE clutch 8.5in? Same as all 2.0 clutches? If so I might take you up on one of them.

Yes 215mm 2.0 GTE size 

26 minutes ago, shaunwilli said:

Yes sounds good.The problem i have is that the clutch fitted in my car appears to foul on the flywheel bolts.There are visible signs on the four springs in the clutch plate and the flywheel bolts.I assumed the noise when depressing the clutch was the release bearing.Everything seems in good nick apart from the rubbing together.So i wanted a new clutch incase the wrong one was fitted.

Thats ok ill take your existing one as an old unit and get it checked to see if its the correct one before doing anything with it

  • Like 1

Share this post


Link to post
Share on other sites
26 minutes ago, shaunwilli said:

So how do we proceed happy to go ahead with the purchase.

Ill pm you 🙂

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...