Jump to content

execman

OMOC Members
  • Content Count

    51
  • Joined

  • Last visited

Everything posted by execman

  1. hi Pete,

    we havent met for years; think it was back at Billing in '94. your exclusive inspired me to modify my then starmist E reg exclusive, in terms of suspension setup in particular.

    then you stopped going a little while after that, so consequently we never linked again.

    question:

    one of my best mates, Paul Mitchell, who has a white E reg exclusive thats been off the road for over 10 years now, wants to know if you ran/still running the Carlton 2.2 ecu on your 2.0 turbo CIH at the time? this is because I tried one on my 2.7 CIH and it didnt run any better than with the standard 2.0 one.

    I ended up going down the Megasquirt route due to cost at the time, (2006)-first with an early MS1, (whose firmware couldnt be updated after multiple attempts recently), to now an MS2 v3, which arrived earlier this week, and will be installed and setup this Saturday, weather permitting.

    I know yours is at Ray West's garage for a while now; when are you going to be back on the road?

    1. GTEPETE

      GTEPETE

      Thanks for making contact....firstly I am still using the standard ecu and is supplemented by an aftermarket ecu from ERL...further modified to add anti- lag and control 4 extra injectors (8 in total). Still 90's technology though....You made a good move with the megasquirt, omex is also a good option....Ray has my cylinder head (2.4) the car is at home....but due to having a child/work etc etc car has been off the road since 2000...hence mileage is still 55000... planning to built a 2.5 bottom end, bigger Turbo etc etc convert to 5 stud hubs and use BMW split rims.....but really like the Irmscher road kit, like the red one being rebuilt on this forum......send us a pic of yours when done...say hello to Paul when you see him...psmotorsport@aol.com

    2. execman

      execman

      thanks for the repy Pete,

      so is there a timescale for when your back on the road? mine's been off the road since 2006, and its only with the help of my best mate, (who'd been working on his immaculate 79 modified B coupe), and Paul, that i had the impetous/gee up to get mine back on the road.

      I had a "no connection" issue on Saturday with the connecting cable between the MS2 and my laptop, so I ordered a "proper" one on Sunday from Megasquirt in the US for £36, so will wait till that arrives in a week or so, before trying again.

      once its up and running, (hopefully), that will get rid of my chronic overfuelling; after MOT i'll then take it to Northampton Motorsport to Dyno in order to properly dial in the MS2. I then have a power steering kit, a second hand ZF LSD, and new headlamps to install; before, sometime in 2021, have the car repainted the same colour-GM pineapple yellow.

      Danny

  2. Jess, I ended buying an MS2 V3 from Phil, as the MS1 proved to be too old to update; we chatted via email and he convinced me to go for the MS2-alomg with a buch of documentation. i'll be installing it this Saturday, weather permitting.
  3. further to: because my MS1 is so old it wont talk to tunerstudio without updating the firmware-which I'm having trouble doing; question: can I do a straight swap with an MS2 unit? are the pin outs the same, as my DB37 connector sensor tails are all plumbed in? Megasquirt UK is doing: MS 2 V 3 Extra Code fully assembled, 2.5 bar MAP sensor, 2.5 Bar MAP sensor, good for normally aspirated or Boosted Engines to 30psi max, and fitted with 2 coil drivers so will run a 4 cycl wasted spark, this is the recommended way as you have complete control of the timing and can also use the onboard rev limiting facility, + your Fuel Injection, comes with a resonable MAP to get you up and running, wiring diagram you can download from this site (Link), DB37 Plug, and DB9 cable to connect to your pc, Price £475.00 + and Shipping + VAT which I'll buy provided I can do a straight swap.
  4. hi, I've finally plumbed in my MS1 v1 I've had sitting in my garage since 2006, and will be setting it up on Saturday via the latest TunerStudio MS which now I've registered; question: how do I connect the tacho MS lead to the Manta? looking around the engine, there's no obvious place.
  5. hi, I have no red fuel pressue light on my dashboard; I know it used to work but has now stopped, since work started gettting the car back on the road after around 5 years parked in my garage. the guage itself works fine; what can be the problem anyone?
  6. PM sent to Andy as regards fire extinguisher.
  7. hi Pete, I have a question to ask: whenever i saw you car back in the day, I noticed you have a fire extinguisher fixed to the nearside front interior; can I ask what spec it is, how its attached and the supplier please. I ask this because the previous Exclusive my engine was in, (E828DJN), perished at the side of the M11 back in 1996, due to a fire in the fuel pump assembly area; anything I can do to not go through that experience again, I'll do. to watch your pride and joy go up in flames, aknowing there's nothing you can do about it, is something I wouldnt wish on anyone.
  8. also, what about the heat factor? are tyre valves able to handle the increased temperature in that area?
  9. yes Herman, its leaking fuel under load; it was fine initailly, but since We've been messing about with the injection system in order to get the car running, we noticed it leaking at the weekend. it makes sense the tyre valve angle, as I'd say they're comparable in size; will the thread be the same though?
  10. Herman, I need a fuel rail pressure relief limiter valve from a vauxhall frontera mk 1, as the one on mine is leaking; I cant find one on Ebay. do you know this valve and is there an equivalent from another manufacturer? I run the Frontera rail as its safer than the standard GTE multi hosed one; I've posed the question to Andy on the parts supplier section, but thought I'd ask you directly, due to your knowledge on all things Manta.
  11. nice article Hermann; very informative.
  12. dont think they were available back then; wouldnt have been able to afford it, even if it was. ideally I'd like throttle bodies rather than EFI, but its the cost again.
  13. yes my 2.7 was built at Torque Developments back in 1996. I first bought a used Mantzel crank from Rocket Ron, who used to work in a tuning shop in North London.he was selling manta parts as he switched to an R32 Nissan Skyline it was in a bad state and needed lots of machining to get it useable. I then bought JE pistons and connecting rods from the US, and the bottom end was bored and stroked to 97.25 x 90 mm as Pete said. the standard 2.0 head was replaced with a Carlton 2.2 along with oversized valves and solid lifters; the cam I'm not sure of- I never asked about it. the whole engine was blueprinted and cost me £5 short of five grand for all the work.
  14. yes I bought a black ally one a couple of weeks ago for £67: https://www.ebay.co.uk/itm/293549091458
  15. fantastic picture H; much appreciated. one drawback of the rail compared to the Manta one, is you cant replace the regulator with an adjustable type like a Sytec/FSE.
  16. much appreciated Buz and Snowy; I have something to go on now.
  17. so the fuel in is the 17mm nut end end of the rail with the return under the regulator, on the Frontera, Snowy? i'll purchase a guage asap thanks. and yes Buz, please provide photos of the rail with fuel lines attached. cheers and thanks Mick, i tried swapping round the flow and return pipes under the bonnet, but it made no difference.
  18. I'm getting poor pressure on my Frontera fuel rail, with little or no fuel getting to the injectors. I've replaced the pump with a Senator B 3.0 one, and I can hear it running on startup, but the engine starts but not run after a few seconds. I suspect the regulator but not sure; question: is the fuel line input just under the regulator on the Frontera rail, or is it the one on the rear of the rail wtith the 17mm bolt? the Haynes manual I have is for the GTE but i'm running the Frontera rail on a 2.2 Carlton head with big valves, sitting on a 2.7 bottom end. its doing my brain in, so need advice, PLEASE..
  19. thanks Herman, i'll have a look at your project.
  20. just found these new ones for £80 each: https://www.ebay.co.uk/itm/GENUINE-BOSCH-FUEL-INJECTOR-OPEL-0280150747-WFI079-/253970970234?autorefresh=true can anyone do better?
×
×
  • Create New...