Jump to content

pma

Users
  • Posts

    549
  • Joined

  • Last visited

Everything posted by pma

  1. Got some for mine a few years back from a corsa/astra,from a scrap yard.
  2. Hi Mark,how the devil are you stranger,just got back from hols,so i do apologise if i'm to late mate,but i have a brilliant contact at SERCK (Sparkbrook),so give me a bell if you decide to go down that route,speak soon,cheers.
  3. Hi Clive,great work on the car! That fag lighter on the table,i've seen that before some where haven't i Mate,can you ring me when you get 5 please,cheers.
  4. Correct,BOSAL list same front pipe,85-88 for hatch and coupe,but different middle and back boxes.I do have the BOSAL part numbers here,so if you need/would like them,just give me a kick.
  5. Hi Scribe, sorry if i have this wrong,but 'read it'??,are you thinking the measurement will be on the hose matey?You will have to measure it bud please
  6. Hi guys, in the last few weeks i've seen a few posts re top and bottom rad hoses (for Manta B's)obviously no one lists these any more,but i may be able to help out.GATES do a product called VULCOFLEX,which is hose with wire running through it.Basically you can bend this into shape,and after hot water has been run through it a few times,the hose retains the shape to which it was bent.So as long as these hoses are a single hose (ie,no splits or joins leading off them)i may be able to help .Can anyone tell me the i/d of these hoses (at both ends please as sometimes the same hose can have different i/d's at either end),and also the total length please.If you can let me know on my works email (as i have all the info/catalogue's there)that would be great; pansell@fpsdistribution.co.uk cheers
  7. Hi guys, so sorry,must be old age,missed this post JULIAN - no probs at all matey,happy to help. JAMES - pull your finger out and get these sorted SCRIBE - as the above says,as long as it is a 1 piece hose (no joints/splits coming off it)i just need to know the i/d.Its best if you give me the i/d at both ends,as some hoses will be different from 1 end to the other! cheers,Paul
  8. pma

    James' SRB

    Hi James,car looks MINT bud,top job
  9. Hi mate, really no probs at all buddy,your more than welcome,anyhow,i seem to remember someone coming all the way over from Leicester for a few days here and there to help me out! pm'd you.
  10. Hi guys,i actually have a new-old stock VL227 in my shed if you want it £25 + post.Leave it with you,cheers
  11. Hi 16VALVES,opel parts greece has given you the measurements matey,the belt is 9.5 wide and 913 in length,any factor should have this on the shelf bud.
  12. pma

    Heater Hoses

    Hth mate; http://www.gates.com/
  13. Hi Clive, thanks for the thanks (you know what i mean)Mate,is your engine the 2.0XE?And will you email me your addy over there Clive,i know i've been over,but due to the fact i'm f---ing old,can't remember my name half the time,and quite frequently soil my own underwear (well,you wouldn't soil any body else's would you?)i can't remember it My email is ; pansell@fpsdistribution.co.uk cheers bud
  14. Not sure by your post if your after an 'of the shelve'item or not.I run a Audi Coupe (1994 2.0 16v)and i took my car to a local place called BMC (Birmingham Motorist Centre)where they made me a bespoke,cat back stainless system.It came out at £325.00 inc vat,which some may say is not cheap-which it isn't,but if you consider that i'm 'in the trade' and sell exhausts,and the price of a 'standard' WALKER system to me (at cost) was only £60 cheaper!you can see my point.I'll give you their phone number,0121 328 1080.It was fitted 12/5/09 and so far,i've not had any problems at all. Hth,cheers.
  15. pma

    Heater Hoses

    Hi mate, as long as its a one piece hose ( i can't remember tbh )meaning it doesn't split off into another hose or have any other hose/s joining onto it,GATES do VULCOFLEX hose,which is basically straight hose with wire within it,then once you've bent it into shape,and run hot water through it,it keeps that shape.All i need to know James is the i/d of the hose at both ends.Let me know bud,cheers
  16. How bloody good does this car look,i really love the look of these cars,especially in white.Just stunning!!
  17. Hi Clive,yeah,i thought that pre-filter looked familiar lol.Mate,once again how do you do it so well.Can't believe the difference between the 1st and the last piccys on this thread -unreal.You able to go to Billing mate,i should be there this year (work,kids and mrs work permitting of course)would be great to see you again bud.Don't forget Clive,if i can help you with any bits,just give me a bell
  18. 9642BK is the STABILUS part number,these are made by SACHS/BOGE,they do make struts for the OEM.(original equipment market)The 030N is the pressure within the unit (30 Newtons)I can still get the tailgate struts brand new for the hatch (not in Stabilus though)if you have no luck or struggle to get them,just give me a kick and i'll sort you out.Cheers
  19. Thats a absolute bargain Bamboo16v,you've done VERY well there mate
×
×
  • Create New...