Jump to content

Paul Barrett

OMOC Members
  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by Paul Barrett

  1. I have a full front nose cut from my old project with a new lower panel welded on. front wings Drop me a message.
  2. I have some doors. mill aube to check but I know o e has had repairs done and needs finishing not sure in the other.
  3. I was bought up opposite there. Was a Lada dealership during my childhood from my earliest memory.
  4. Will depend how high you have seats set I guess, I have to have drivers on lowest mount points, I haven’t measured up yet though
  5. I haven’t no, could be a good shout. thinking of going for an underseat sub woofer too
  6. I’ve jus built them for a recently acquired coupe I’m afraid. very easy to do Mike. this is the link to speakers https://www.ebay.co.uk/itm/Alpine-150W-2Way-4-x6-4x6-SXE-Car-Door-Shelf-Speakers-/371057192333?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=710-127635-2958-0
  7. No use but these alpines fit well and covers snap back on for modern sounds
  8. Hi Steve, where abouts in Northampton?
  9. I have the incorrect wheel in PEE and don’t have a spare later one anymore. would anyone like a swap for the SR one?
  10. Not a bad price for a hard to source box https://www.ebay.co.uk/itm/GEARBOX-R25-R28-GU-90372994-Carlton-Senator-C26NE-30NE-C30NE-/363470623812?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=710-127635-2958-0
  11. Safety devices list a cage for manta A will get order soon few dealers over the uk for them
  12. That is such a shame Mike, if you were UK I’d buy the whole lot off to finish!
  13. I let now complete, had to build up the surface lip with weld where someone had modified it previous but had t really repair it well. also re welded up all the crap vacuum holes that had been drilled into the plenum, forgot to take before pics, it’s come out well and the cast ally is of good quality at least. Just need a throttle body now and inlet is complete.
  14. It’s an exclusive coupe I’d like it to be correct. the rear bench matches the door cards so I guess I need to match the front seats please excuse my lack of knowledge im an A series man.
  15. Been sizing up the jenvey plenum I’ve landed for bit a lot of monies, I have various other inlet bits, I need to have this more towards the engine for clearance but will work as I do t intend using throttle bodies for the turbo engine as a pain to setup and balance with forced induction.
  16. Hi all, trying to get a match up for my new acquisition. these are the current seats so I’m after either a good pair of fronts with the same cloth as the rears (door cards match the rear bench) or visa versa
  17. I looked into that so much to make it work, god knows how they managed it as there is so little room to drop the glass into the quarter with a mechanism. looked at Mk4 escort cabriolet mechs but don’t drop the full way. also a BMW setup but the mech too big to house.
  • Create New...