JackA1972 Posted July 13, 2013 Share Posted July 13, 2013 http://www.motorsportworld.co.uk/detprod.asp?productcode=ASH-AVXM35&PID=363211 does anybody know if this will fit around the bottom of the steering column? has anybody bout this before? Quote Link to comment Share on other sites More sharing options...
lamchop77 Posted July 24, 2013 Share Posted July 24, 2013 Jack Is your motor tuned? If not or mildly then just stick with the std manifold. There no real gains to be had fitting tubular manifolds, its about 1/2 bhp on a tuned motor!! (cam, ported head 45's, etc) HTH Chris Quote Link to comment Share on other sites More sharing options...
Manta again Posted July 24, 2013 Share Posted July 24, 2013 Agree with above, also probably won't fit as it doesn't specify the A series as most tuning stuff was done for the B's and up and it would most likely foul on the tie bar.. Quote Link to comment Share on other sites More sharing options...
Shug Posted July 24, 2013 Share Posted July 24, 2013 A series stuff has a kink to clear the anti roll bar. B series exhaust stuff needs the roll bar lowered to fit on an a. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.