Resurrection Motorsport Posted October 22, 2019 Share Posted October 22, 2019 (edited) looking for something to cope with about 200 bhp, its in a Ascona on a 16v 2.0 xe Also looking for some stiffer springs for tarmac rally, car is a 400 with the chassis raised at rear 1" Any assistance would be appreciated, thanks Jim Edited October 22, 2019 by Resurrection Motorsport Link to comment Share on other sites More sharing options...
rutts Posted October 27, 2019 Share Posted October 27, 2019 You could buy a bellhousing for 16v to ford. Make an adapter plate and use your 265 gearbox you have. Then when you fit 400 engine it's just a bellhousing change. Made this a few years ago with help from kev abbott. It's an old 1.8 getrag cut down and welded to 6mm alloy adapter. 2 Link to comment Share on other sites More sharing options...
Recommended Posts