guysat Posted March 7, 2010 Share Posted March 7, 2010 Hi everyone I have just fitted a 2.4 exhaust manifold (Cast iron piece) and the back three sections of a new Jetex exhaust system. Unfortunately Jexex have no downpipe sections left (2 into 1 piece). So im looking for a 2" downpipe section that is the same size as the standard exhaust. Does anyone know who would be able to supply a 2" downpipe section....? I don't want to install a 4-1 type of manifold Guy Quote Link to comment Share on other sites More sharing options...
blueosis1 Posted March 7, 2010 Share Posted March 7, 2010 have the down pipes for a 1.8 from the underside of the manifold .i think it goes from 2 into 1 from a jetex exhaust system. would have to check the diamter for you if thats any help mark Quote Link to comment Share on other sites More sharing options...
guysat Posted March 7, 2010 Author Share Posted March 7, 2010 have the down pipes for a 1.8 from the underside of the manifold .i think it goes from 2 into 1 from a jetex exhaust system. would have to check the diamter for you if thats any help mark Hi Mark I thought the 1.8 exhaust was on the other side of the engine to the CIH version. I could be wrong thou ? Guy Quote Link to comment Share on other sites More sharing options...
rutts Posted March 7, 2010 Share Posted March 7, 2010 ansa front pipe on ebay now or was the other nite. Quote Link to comment Share on other sites More sharing options...
blueosis1 Posted March 8, 2010 Share Posted March 8, 2010 no problem ,had the front piece going spare if you needed it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.