Mick Posted June 19, 2010 Share Posted June 19, 2010 I have a scruffy Irmscher wheel on my Cavalier, but have seen plenty of nice ones on ebay with 6 hole fixings and horn push. Question is are the holes in a set place or are they different depending on manufacturer? Can I use the Irmscher boss I already have? This is what I have. Quote Link to comment Share on other sites More sharing options...
Shug Posted June 19, 2010 Share Posted June 19, 2010 If its a mountney you can get the boss from europa parts for 12 quid. Quote Link to comment Share on other sites More sharing options...
Quarter-Life-Crisis Posted June 19, 2010 Share Posted June 19, 2010 (edited) I have a momo wheel on and the measurement from opposite mounting holes, centre to centre is 71mm. I have a steering wheel i bought from hemswell car boot for £2 and its measurments are 77mm. (hence i now know the reason it was only £2) Thanks for the advice about the starter. My link Edited June 19, 2010 by Quarter-Life-Crisis Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.