Jason b Posted May 31, 2014 Share Posted May 31, 2014 Hi all, Been away a while sorting new job and moving house. However, I've just started back on the cav again! Despite the rest of the shell being in decent condition, upon removing the windscreen I was greeted with lots of rust. Normally I'm happy to do good rust repair. However, I'm wary that there are three panels and it doesn't look particularly straightforward to form new sections. Any one with any tips... or spare pillar sections(haha)? Cheers, Jason Link to comment Share on other sites More sharing options...
stradacab Posted May 31, 2014 Share Posted May 31, 2014 Depends where the holes are. You can let metal in or you can replace the scuttle if the corrosion is there Link to comment Share on other sites More sharing options...
Jason b Posted June 1, 2014 Author Share Posted June 1, 2014 Basically the entire windscreen pillar panel on the interior side needs replacing, not sure how bad the inside of the pillar is yet though... there are a few holes in the scuttle but they are easily sorted. I'll try and take a pic if I can. Link to comment Share on other sites More sharing options...
Manta78 Posted June 4, 2014 Share Posted June 4, 2014 Hi Guys , Sorry If I'm Interrupting But I Would Need The Pillars Aswell For My Car As It Was A Sunroof And The Water Set It The Pillars Link to comment Share on other sites More sharing options...
Recommended Posts