Injector o ring fitment

[Cone8v]

I cant find injector lower O rings for my 2.0 E manta (yellow injectors)

Do they fit to any other cars and can anyone supply me with part codes so that i can search for them in my country.

Are they in any special size or not?

[Cone8v]

Found the seals on edelschmiede website but id rather not wait 10 to 15 days. Does anyone know the measurements for the o rings? I would try to find similar ones by size 

[cam.in.head]

i had the same problem even from a injector specialist. they are not round 'o' rings but square section o rings and obviously need to be heat proof to a degree but not fuel proof as they dont come into contact with it . im sure that rooting around the internet / google images etc should bring up some possibilities as similar injectors were used on other cars . 

 

and to be honest if you had some sort of accurate cutting machine/ jig im sure you could make some from "slices" of hose ?

[GTEPETE]

1980s Jaguar 4.2 ones are the same...

[cam.in.head]

i may be wrong but im sure that came up in a search yes but there was something different about them ???

i actually found mine in a couple of head gasket sets j had accumulated over the years . 

[Cone8v]

6 hours ago, cam.in.head said:

i had the same problem even from a injector specialist. they are not round 'o' rings but square section o rings and obviously need to be heat proof to a degree but not fuel proof as they dont come into contact with it . im sure that rooting around the internet / google images etc should bring up some possibilities as similar injectors were used on other cars . 

 

and to be honest if you had some sort of accurate cutting machine/ jig im sure you could make some from "slices" of hose ?

I found nothing close to the square ones here

Dad found 4 new o rings he was holding on to. They are the same size but arent square and i put them in a couple of minutes ago (same round O-rings were already on the car and they sealed perfectly but were very hard and started cracking).

This is before i saw your message i didnt think of cutting a hose .Thats a pretty good idea 🙂

ill order a square set to have in reserve but these round ones are doing the job perfectly. 

[cam.in.head]

if i find any alternative ideas il let you know.

[GTEPETE]

https://www.ebay.co.uk/itm/235641366167?_skw=opel+manta&itmmeta=01JD58BZ9EDFZ6XC48TAJ6XG3R&hash=item36dd51e697:g:WtUAAOSw53ZmiSjc&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJKlDZli7Fo3tL0wVTJ3EkrTgCiwnuevJrcz5sKsYv%2FHfBM00tbYNvYrvi%2FNz18ZpodD1mcpsqBi0OCal36nLNOF0lL520%2FLTSvM5Lfn9L1jyfDnxy%2BhlRxx%2FnnIuLVmQEr2mcTeE1w4c7gbSbeClPmMicTO8ECf7%2Bm0E7AcwP9%2Fw52q7%2Bwhu1mhzzOo6MFmglVI45C8x3Biv4YHlC6eEb6r3PL7%2BhlZuCH5HJTgLkDcMZoySbSbXqW%2Bs0jBa77qoGhQ%3D|tkp%3ABk9SR-r0r6jpZA

[cam.in.head]

that will do it !

although its an expensive way of getting the 4 seals needed !  but will work nonetheless .