Jump to content

Manta B 400 Bonnet


davo
 Share

Recommended Posts

thanks for being honest Retro

but your probably a bit far from me to come & view a scabby bonnet!!

i may be passing your way but not sure when,so if i do i'll give you a shout to see if its still about

cheers

Link to comment
Share on other sites

Yes I saw that one. It come up a couple of days after I posted my ad. Am keeping an I on it. Only prob its I'm Devon and I'm I'm Kent !!!

May have to take the misses away for a weekend!!

Link to comment
Share on other sites

That's mine :)

Selling as it's surplus to requirments. I'm going to build a steel one whenever I get some time, need to finish the car first.

Nearly came close to chopping the vent's out at one point but thankfully I saw sense! :o

Only used on a road going car for no more than a couple of years.

Think the white marks on the left are just bird poo. No bonnet pin holes. Basically what I done to hold the corners down was to make a small bracket the fitted to one of the bolts that hold the wing on at the front and use a small bolt with a rubber washer under the head the passed between to side of the bonnet and wing and then just screwed in to the bracket. Just had remember to carry a screw driver if you needed to open the bonnet!

And it's in North Devon.

IMG_3447.jpg

As fitted to my previous Manta.

manta-with-bonnet.jpg

Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...