Jump to content

A Series Spares, Sensible Offers Considered


Mantney
 Share

Recommended Posts

List of spares as follows which were aquired for my Opel Manta A series 1.9s (also for sale).
Items should be considered USED and untested unless otherwise stated.

Body, lights, interior -

Pair of front wings, require attention - £35 each
Pair of doors, require attention - £25 each - 

1x drivers side sill surface rust and storage marks only - £40 

1x drivers side rear quarter light - £15
1x rear carpet section, black - £25 
1x front bumper, some surface rust £30

Steering a suspension -

1x front axle requiring attention, includes steering rack, needs a good rub down but not beyond hope £25
Full set of springs, hardly used - £60
2x Boge automatic shocks, hardly used (# 1-0696-27-116-0, #366) - £40 the pair
2x Sachs super shocks,  rears , hardly used (# EM 106045) gas I think - £35 the pair
Polybush set from GT Source for upper and lower control arms, unused £50

2x track rod ends, unsued -£35 the pair

 

Brakes -

Engine and drive -

1x exhaust front pipe, usable - £20
1x exhaust centre baffle, unused gm part - £40  
1x used radiator, untested, looks ok - £25
1x air filter box - £10
2x radiator hoses, top and bottom I think - £20 the pair

Other bits

GM oil seal 614812 90156857 unopened - offers
GM seal ring 0289 3341 unopened - offer

1.9 CIH ENGINE block and head £10.

 

 

Cash on collection from Pembrokeshire or will send at buyers expense.  

Edited by Mantney
Link to comment
Share on other sites

  • 2 weeks later...

would really be interested in the glove box. let me know if you change your mind.

Decided to split the lot so here are some pictures if you're still interested 

 

IMG_00000755.jpg

 

IMG_00000756.jpg

 

I would describe it as very good, needs some back to black to bring it up. I have pics of the back and sides if you want them.

Link to comment
Share on other sites

Interested in poly bush set if manta88 didn't mean that :)

 

Tony

Will split the lot heres some pics of the bushes if you're still interested 

IMG_00000752.jpg

 

Cant figure out what the 3 big ones are for.

Link to comment
Share on other sites

the rear shocks mate

 

 

Hi, I would be interested in the ball joints, spring seats, the four rubber bushes for the rear trailing arms and the track rod ends. How much would these be? Also when you say boot catch does this include the lock as well? 

 

Alan

 

 

Interested in poly bush set if manta88 didn't mean that :)

 

Tony

 

 

I'm interested in the front suspension if you change your mind.

 

 

would really be interested in the glove box. let me know if you change your mind.

 

 

Wow big list, no interest in selling off individual items?

I've tried to individually price everything now, let me know if you want pics.

Link to comment
Share on other sites

Hi, I would be interested in the ball joints, spring seats, the four rubber bushes for the rear trailing arms and the track rod ends. How much would these be? Also when you say boot catch does this include the lock as well? 

 

Alan

There's no lock on it, it's the inside gubbings

Link to comment
Share on other sites

I've found my set of rear shocks! But I need the mounts for all the front headlights if you have them? Also the grill is that all three parts or just the centre section? I'd be interested in the blower matrix and housing does this include the motor? Sorry for the noddy questions my manta doesn't have a heater at all!!

Link to comment
Share on other sites

I've found my set of rear shocks! But I need the mounts for all the front headlights if you have them? Also the grill is that all three parts or just the centre section? I'd be interested in the blower matrix and housing does this include the motor? Sorry for the noddy questions my manta doesn't have a heater at all!!

Would the headlight bits you refer to be the metal cups and bezels? Its just the center grill section, i have the 2 outers but i think a screw on each one has been pulled out, if i take a picture tomorrow for you you'll see if they are use. The fan is on the heater but whether it works or not I dont know.

Link to comment
Share on other sites

That would be awesome cheers mate! I have a centre section but no outers, I'm not too fussed if the outers are missing some of the attachment holes as I need to manufacture the mounts anyway. I'll still probably take the heater and take the hit either way, and finally yes it's the bezels I need but if I can get a decent set of spares I'm sure we can work something out

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...