penyghent Posted July 23, 2017 Share Posted July 23, 2017 Hi,can anyone enlighten me please how to remove the boot lock from an A series. Haynes manual aint much use. Cheers Mark Quote Link to comment Share on other sites More sharing options...
Paul Barrett Posted July 23, 2017 Share Posted July 23, 2017 Need to make a tool. An old deep socket ground down with two small pegs left. Can't remember diameter needed Quote Link to comment Share on other sites More sharing options...
mantaray Posted July 23, 2017 Share Posted July 23, 2017 There is a threaded ring that holds it all in place. with the catch removed, look through the hole at the rear of the lock, and you will see the ring with 2 small slots in it. As Paul has just said best way is to make a tool but it can be done with 2 screwdrivers if it is not too tight. Quote Link to comment Share on other sites More sharing options...
mantaray Posted July 23, 2017 Share Posted July 23, 2017 Socket is 7/8th 1 Quote Link to comment Share on other sites More sharing options...
penyghent Posted July 23, 2017 Author Share Posted July 23, 2017 Cheers for the help will give it a go. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.