DASH BULBS

[Mantacol]

Hi All 

Have any of you replaced the dash bulbs and rear No plate bulbs with an upgrade at all some form of L.E.D.

If so what did you use please and what do i look for . 

thanks 

Colin

 

[Mickfrad]

Hi Colin 

I replaced my dash bulbs with led ones as I thought the original were quite dark.

i brought white and blue ones as I was unsure how bright they would be. After trying them I went for the white ones and found them to be a vast improvement over the originals.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F191425085352 

Can't remember where I got mine from but plenty on eBay 

[Kevin Abbott]

Yep I replaced my number plate lights with generic ones in the correct width. I used two instead of 3

Dash lights I replaced with T5 wedge LEDs. 

I used red in mine and it looks mint at night. 

Blue. Red. Yellow. Green. White available. A couple of quid for 10

Edited October 21, 2017 by Kevin Abbott

[Daza]

I used VW/Audi led number plate lights.

You do away with the old rusty holder completely!

Looks awesome!!!

Daz

[Steven Gray]

Did they go straight in the original holder or did you have to replace that as well? For the instrument panel please 

Edited November 29, 2017 by Steven Gray

[Mickfrad]

Plug straight in. in place of the original bulbs. 

Original bulb on the left two different leds on the right 

[Daza]

The number plate light is the complete unit. It's a little shorter than the original. And I only used 2 units instead of 3. It's bright enough 😎

Dash lights used LED as above!

 

D

[Steven Gray]

I'm fine with the original number plate light just want to be able to see the speedo lol thanks for the answer I've now orderd some. 

[Daza]

You will notice a vast improvement!

😉