Fasterthanyou Posted September 12, 2009 Share Posted September 12, 2009 I am about to embark on this little() task in order to put on a solid roof skin and basically as I have never done it before I wanted a few pointers on how to. I presume that the spot welds are under the screen rubbers and these need to be drilled out but what about each side?? and do the pillars have a joining section to cut through? Quote Link to comment Share on other sites More sharing options...
simon p Posted September 13, 2009 Share Posted September 13, 2009 (edited) I am about to embark on this little() task in order to put on a solid roof skin and basically as I have never done it before I wanted a few pointers on how to. I presume that the spot welds are under the screen rubbers and these need to be drilled out but what about each side?? and do the pillars have a joining section to cut through? Del, i thought you had done at least half done the job before. Edited September 13, 2009 by simon p Quote Link to comment Share on other sites More sharing options...
Fasterthanyou Posted September 13, 2009 Author Share Posted September 13, 2009 (edited) Long time ago. Edited September 13, 2009 by Fasterthanyou Quote Link to comment Share on other sites More sharing options...
mantadoc Posted September 13, 2009 Share Posted September 13, 2009 There was a thread on this about two weeks ago in one of the tech sections Quote Link to comment Share on other sites More sharing options...
stradacab Posted September 13, 2009 Share Posted September 13, 2009 Also try James SRB in project section. He had his replaced, might be able to pm him for some advice too. Quote Link to comment Share on other sites More sharing options...
upk Posted September 13, 2009 Share Posted September 13, 2009 try this thread http://forums.mantaclub.org/topic/833-replace-roof/page__pid__114155__st__0&#entry114155 kev Quote Link to comment Share on other sites More sharing options...
Fasterthanyou Posted September 13, 2009 Author Share Posted September 13, 2009 Also try James SRB in project section. He had his replaced, might be able to pm him for some advice too. try this thread http://forums.mantac..._0&#entry114155 kev Thanks guys, just what I needed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.