shooie811 Posted December 17, 2013 Share Posted December 17, 2013 Hi went to to fit the 1800 sump to my let engine and the drip tray touches the inside of the sump can i run it without it or do i need a different one? Cheers chris Quote Link to comment Share on other sites More sharing options...
paulmanta Posted December 17, 2013 Share Posted December 17, 2013 Two gaskets are needed, one is just a gasket and the other is a metal windage tray with a gasket on one side, you trim the windage tray where it hits and then bolt the whole lot up. GOT to be GM, don't use pattern part or it will leak. Quote Link to comment Share on other sites More sharing options...
garymanc Posted December 17, 2013 Share Posted December 17, 2013 trim it like http://www.opelmanta16v.4mg.com/ that one or do what most people do fitting a c20xe and bin it Quote Link to comment Share on other sites More sharing options...
shooie811 Posted December 18, 2013 Author Share Posted December 18, 2013 Cheers for the info guys another question didnt think about it before but will it be ok with the pickup from the let or will i need a 1800 one Cheers chris Quote Link to comment Share on other sites More sharing options...
mantasrme Posted December 19, 2013 Share Posted December 19, 2013 You need an 1800 one to reach into the bottom of the 1800 sump If you can't find one the LET one can be modified, infact Retropower offer that service on an exchange basis Quote Link to comment Share on other sites More sharing options...
shooie811 Posted December 19, 2013 Author Share Posted December 19, 2013 will get in contact with them cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.