spiney_norman Posted May 21, 2015 Share Posted May 21, 2015 I realise both of these things are long shots, but a friend of mine has a 1.9 CIH with a knackered oil pump, he's in need of a decent cover and quite possibly the gears as well if anyone has anything available. Apparently it's the earlier type with a plain cover. He's also on the hunt for a set of chrome wheel arch trims to finish the car off. Can anyone help out? Link to comment Share on other sites More sharing options...
611 Posted May 22, 2015 Share Posted May 22, 2015 They have new bits on here http://www.atz-online.com/and here www.enem.se but very expensive. I might have a cover like this http://www.opelgtsource.com/store/6000/6021.jpg and i do have some trim, but need to have a rummage about as some are spares for mine and some are extra. Not sure what i have up there anymore :-) I need to do a final clear out. I can have a look over the weekend if that's any good? Andy Link to comment Share on other sites More sharing options...
OPEL PARTS GREECE Posted May 22, 2015 Share Posted May 22, 2015 (edited) They are available ( only the cover and the driving gears both types) OIL PUMP ALU COVER WITH RELIEF VALVE 16 19 20 22 135GBP GEAR PUMP OIL DRIVING 78,5 STD 1,7-1,9-2,0N/S/E 22E 85GBP GEAR PUMP OIL DRIVING 80,5 STD 1,7-1,9-2,0N/S/E 22E 85GBP Delivery from GM USA All of them are genuine and NEW Stock is VERY limited. Pm for more details Edited May 22, 2015 by OPEL PARTS GREECE Link to comment Share on other sites More sharing options...
Shug Posted May 22, 2015 Share Posted May 22, 2015 I think I have the gears somewhere. Used tho. Not sure on condition. I'll check tomorrow. Link to comment Share on other sites More sharing options...
moodoo Posted May 22, 2015 Share Posted May 22, 2015 The cover is probably just scored from the gears? If it's the plain cover, without the pressure relief valve in it it's really just a flat plate with 6 holes...local machine shop should be able to machine smooth again without having to buy a new part? 1 Link to comment Share on other sites More sharing options...
spiney_norman Posted May 22, 2015 Author Share Posted May 22, 2015 The cover was apparently skimmed but not very well, and the owner is fairly sure something has gone through the pump and wrecked the gears as well. The cover is the early type without the PRV, I'll put these suggestions to him! Andy and Shug, if you can let me know what you've got I'd appreciate it Link to comment Share on other sites More sharing options...
611 Posted May 22, 2015 Share Posted May 22, 2015 (edited) The cover was apparently skimmed but not very well, and the owner is fairly sure something has gone through the pump and wrecked the gears as well. The cover is the early type without the PRV, I'll put these suggestions to him! Andy and Shug, if you can let me know what you've got I'd appreciate it I will have a cover or two knocking about but it wont be the flat type. I will get in the loft and have a rummage about for chrome. Is it all w sides he is after? didnt think i will have all spare but it will make it easier if i know which ones to look for. Anyone else need anything while im up there rummaging about?? as i dont go up there too often :-) Edited May 22, 2015 by 611 Link to comment Share on other sites More sharing options...
spiney_norman Posted May 22, 2015 Author Share Posted May 22, 2015 Thanks Andy, he's after all four chrome wheel arch trims, they've all gone walkies somewhere along the line! Not aware of anything else at the moment other than what's listed here, a later type oil pump might do the job but only if it's as part of a complete later timing cover so he can swap the whole lot over. Cheers Link to comment Share on other sites More sharing options...
Shug Posted May 23, 2015 Share Posted May 23, 2015 One set gears with plain plate, no valve. Link to comment Share on other sites More sharing options...
turbo16n Posted May 24, 2015 Share Posted May 24, 2015 Have wheel arch trims,will look to see if I have set,would have to be picked up,as they would be scrap if sent by Royal Mail! 1 Link to comment Share on other sites More sharing options...
611 Posted May 26, 2015 Share Posted May 26, 2015 I have some of the trim. i need to do a test fit to see which ones they are, but i think the rear, both sides. I will check after work and confirm what i have and gets some pictures up on here. Andy Link to comment Share on other sites More sharing options...
611 Posted May 26, 2015 Share Posted May 26, 2015 Ok so i have: 2 x passengers rear, 1 x drivers rear, 1 x passengers front In quite good condition. One has a slight dent but looks easy to remove and shouldn't effect the shape. Some pics on here: http://www.theopelproject.com/?page_id=94 as couldnt be arsed to post on here.. :-) Let me know if your interested and we can sort out a price as i couldn't find any on ebay to get an idea. Andy Link to comment Share on other sites More sharing options...
spiney_norman Posted May 27, 2015 Author Share Posted May 27, 2015 Hi Andy, really appreciate it, but I feel a bit silly now... Probably should have mentioned somewhere along the line that his car is a '78 B series! Thanks for trying though Link to comment Share on other sites More sharing options...
611 Posted May 28, 2015 Share Posted May 28, 2015 No problem, i just presumed that as it was a 1.9 that it was an A. Still made me sort out some bits :-) Now i can ebay them!! andy Link to comment Share on other sites More sharing options...
nickincrete Posted June 4, 2015 Share Posted June 4, 2015 I have a set of good gears 25 quid inc post You can usually rub down the plate with a flat piece of glass and some valve rubbing down compound. pretty easy and will be perfectly flat Nick Link to comment Share on other sites More sharing options...
spiney_norman Posted June 4, 2015 Author Share Posted June 4, 2015 Thanks Nick but the oil pump's all sorted now! Link to comment Share on other sites More sharing options...
Recommended Posts