TrevorH Posted July 29, 2023 Share Posted July 29, 2023 I have got my restoration underway now I started with this Project images are available to Club Members Only, Click to become an OMOC Member. And after stripping the car and getting it dipped it was not as bad as I thought it might be ! But will still require a bit ! of welding before ecoating . I have been looking to see what panels can be bought , there seem to be a few sources for them does anyone have recommendations ? I guess I need , sills ( there seem to be some with the lower part of the rear quarter panels which would be useful ) , drivers door skin ( at least ), repair panels if they are available for the front , and maybe the front part of the chassis rails A few pictures below for anyone who is interested Trevor Project images are available to Club Members Only, Click to become an OMOC Member. Issues seem to be one of the chassis Rails Project images are available to Club Members Only, Click to become an OMOC Member. Sills Project images are available to Club Members Only, Click to become an OMOC Member.Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Above the lights Project images are available to Club Members Only, Click to become an OMOC Member. Drivers Door Project images are available to Club Members Only, Click to become an OMOC Member. Passenger Floor 7 Quote Link to comment Share on other sites More sharing options...
Moonmonkey Posted July 29, 2023 Share Posted July 29, 2023 Hi Trevor, welcome. Looks like your doing a thorough job there. Tim at TJ Motorsport has a lot of repair panels in the UK - tjmotorsport.co.uk Ebay is also a good source, where you can get some in the UK and some from Germany, like floor panels etc. I would shop around as prices vary considerably. The club are also getting a few panels remade, battery tray is available in the shop. Check some of the threads for roof panels etc 1 Quote Link to comment Share on other sites More sharing options...
Vince Posted July 29, 2023 Share Posted July 29, 2023 Ah an early B2 coupe. Even better its Silver. Its just that combination that got me into Manta's in the first place. Is this the one from Matthewsons ? Quote Link to comment Share on other sites More sharing options...
TrevorH Posted July 29, 2023 Author Share Posted July 29, 2023 Yes it is indeed 1 Quote Link to comment Share on other sites More sharing options...
Simonl Posted November 18, 2023 Share Posted November 18, 2023 How is the restoration coming on I started mine last month I’m in Towcester must be close to you Quote Link to comment Share on other sites More sharing options...
TrevorH Posted December 9, 2023 Author Share Posted December 9, 2023 The welding will start this month , but ee have managed to get the rear axle and engine finished , just waiting for some upper arm bushes to complete the front subframe Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. 6 Quote Link to comment Share on other sites More sharing options...
®evo03 Posted December 10, 2023 Share Posted December 10, 2023 Great project, is there any protection between dipping and e coating. All panels needed shown are available. Make a list, and post it up. As time moves on, so do parts suppliers. It's hard to keep track sometimes. Club really needs a updated, current parts supplier thread, and members discount would work well. I organised discount with biggred, a brake parts supplier, which most members probably don't know about, things like this should be listed, publicised. Great project, plenty on here will offer help, parts, and info, and any parts info. 1 Quote Link to comment Share on other sites More sharing options...
Jonathan Pounsett Posted December 10, 2023 Share Posted December 10, 2023 47 minutes ago, ®evo03 said: Great project, is there any protection between dipping and e coating. All panels needed shown are available. Make a list, and post it up. As time moves on, so do parts suppliers. It's hard to keep track sometimes. Club really needs a updated, current parts supplier thread, and members discount would work well. I organised discount with biggred, a brake parts supplier, which most members probably don't know about, things like this should be listed, publicised. Great project, plenty on here will offer help, parts, and info, and any parts info. The parts list could be cross referenced with alternative parts that fit and work. Modern alternatives with ongoing availability. Quote Link to comment Share on other sites More sharing options...
®evo03 Posted December 10, 2023 Share Posted December 10, 2023 Plenty of suspension work there, would be interesting if you could list your parts already purchased, suppliers, costs etc. Quote Link to comment Share on other sites More sharing options...
cam.in.head Posted December 11, 2023 Share Posted December 11, 2023 and as for any repair panels that arnt available try watching a youtube channel called " yorkshire car restoration" those guys know their stuff and make 99% of all their repair panels .makes it look super easy ( they have obviously more gear than the average diy'er ) so that certainly helps but beware. their videos are very addictive ! Quote Link to comment Share on other sites More sharing options...
TrevorH Posted December 11, 2023 Author Share Posted December 11, 2023 On 10/12/2023 at 05:49, ®evo03 said: Great project, is there any protection between dipping and e coating. All panels needed shown are available. Make a list, and post it up. As time moves on, so do parts suppliers. It's hard to keep track sometimes. Club really needs a updated, current parts supplier thread, and members discount would work well. I organised discount with biggred, a brake parts supplier, which most members probably don't know about, things like this should be listed, publicised. Great project, plenty on here will offer help, parts, and info, and any parts info. When I have done this before on other cars the process I have followed is dip, weld , ecoat ( they actually dip the car again as part of this process ) then paint so I have not done anything between the initial dipping and welding when I have not ecoated I applied weld through primer immediately the car came back from dipping I am happy to pull a list together , I guess what is also interesting is the speed of dispatch , and customs issues post Brexit I have been surprised at the availability issues on the superpro bushes 13 hours ago, cam.in.head said: and as for any repair panels that arnt available try watching a youtube channel called " yorkshire car restoration" those guys know their stuff and make 99% of all their repair panels .makes it look super easy ( they have obviously more gear than the average diy'er ) so that certainly helps but beware. their videos are very addictive ! Just had a quick look ( 2 hours ! ) at the Yorkshire car restoration channel as you say addictive ! .. we can do a bit of fabrication but not to that standard so I think I have managed to get most panels I need ! Fingers crossed Quote Link to comment Share on other sites More sharing options...
cam.in.head Posted December 12, 2023 Share Posted December 12, 2023 they have done some arches on a manta. its still in there ! but yes i told you you would like it ! Quote Link to comment Share on other sites More sharing options...
®evo03 Posted December 12, 2023 Share Posted December 12, 2023 Making panels is a good 80% of the time. I find cereal boxes good, easy to cut, fold, crease, and form, for making templates. If you weld, buy new sheet metal. Clean it, solvent cleaner, then sand with a sanding block. Lay two pieces flat and weld. Practice. Practice makes perfect I stamped a boot floor out using the old floor as a template. Not a manta. But easy done. Cold chissles, bolsters, blunt wood cheeses. Just look at this project thread, anything is possible. This is my go to for inspiration, it's not about flash, cheque book cars, this is talent, money can only replicate. FFS, he made chassis legs 😎 1 Quote Link to comment Share on other sites More sharing options...
TrevorH Posted September 17 Author Share Posted September 17 Hi It been a while but the welding is finished it ended up sills, lower rear quarters, a bit of both floors ,swan necks, closing panels, spare wheel well, plus loads of bits and the most fiddly bit which was sorting the front out as it was more rotten than first though so I ended up getting a 2 slot front and convering it to 4 The shell has now been eCoated and is now at the paint shop. A few pictures attached Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. 9 Quote Link to comment Share on other sites More sharing options...
Jessopia74 Posted September 17 Share Posted September 17 Nice work indeed. Had the same issue post dipping on my Exclusive shell, front past A posts is pretty much scrap 🤣 Still on its spit, get to it some time in the future 1 Quote Link to comment Share on other sites More sharing options...
Vince Posted September 17 Share Posted September 17 Don't forget to drill the drivers jacking point for the fuel lines to pass through it. Project images are available to Club Members Only, Click to become an OMOC Member. 1 1 Quote Link to comment Share on other sites More sharing options...
Paul Barrett Posted October 17 Share Posted October 17 Howse this coming along Trevor? Quote Link to comment Share on other sites More sharing options...
TrevorH Posted October 17 Author Share Posted October 17 (edited) A bit more progress , Raptor on underside and interior painted . Nearly finished the prep before starting the primer Like to get the assembly started in Nov Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Edited October 19 by TrevorH 6 Quote Link to comment Share on other sites More sharing options...
Jessopia74 Posted October 17 Share Posted October 17 I do like Raptor, it just is superb for the underside of a restoration. It’s looking great Trevor, nice work 😎🙌 3 Quote Link to comment Share on other sites More sharing options...
TrevorH Posted November 23 Author Share Posted November 23 Primer all completed , first colour in engine bay Should be good progress next week Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. 7 Quote Link to comment Share on other sites More sharing options...
Paul Barrett Posted November 23 Share Posted November 23 Looking great! Quote Link to comment Share on other sites More sharing options...
®evo03 Posted November 23 Share Posted November 23 Nice job, great effort, is it Astro Silver? Quote Link to comment Share on other sites More sharing options...
TrevorH Posted November 24 Author Share Posted November 24 Yes it is Astro Silver 1 Quote Link to comment Share on other sites More sharing options...
TrevorH Posted December 4 Author Share Posted December 4 Finally the painting is complete Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. Project images are available to Club Members Only, Click to become an OMOC Member. 8 Quote Link to comment Share on other sites More sharing options...
Jessopia74 Posted December 4 Share Posted December 4 Lovely, do love a silver coupe 😎😁 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.